Technology Report
Executive Summary
- The semiconductor industry's post-pandemic rebound boosted capacity to the extent that some foresee an oversupply.
- But cyclicality in the sector is normal, and it's actually been leveling out over time as the end markets for chips have broadened and suppliers have consolidated.
- Even so, supply-and-demand balance could remain bumpy in three areas that customers should monitor: bleeding-edge, leading-edge, and super-lagging chips.
- Companies can guard against the risks of imbalance by designing products for resilience and flexibility, taking advantage of moments of oversupply, and developing chip-specific strategies for mission-critical components.
This article is part of Bain's 2023 Technology Report.
Many manufacturers that depend on the semiconductor supply chain are breathing easier now.
As post-pandemic demand for PCs, smartphones, and consumer devices eased, capacity grew in the semi market. In fact, we’ve gone from a chip shortage in 2021–2022 to underutilization of capacity in some parts of the semi value chain. Some say this is a harbinger of a massive capacity glut, implying we no longer need to worry about securing our semiconductor supply chain. We disagree.
Cyclicality and brief periods of underutilization are normal features of the semiconductor business cycle. But cyclicality has actually dampened over the past couple of decades for three main reasons (see Figure 1).
- First, the law of large numbers suggests that the broad set of end markets, each with different demand cycles, helps counter-balance demand.
- Second, although memory is the most cyclical part of the semi market, it now represents a smaller portion of total capex.
- Finally, fewer suppliers of logic and memory result in a less irrational supply.
Cyclicality has moderated in the semiconductor market
Cyclicality is likely to continue, but structural or long-term overcapacity is unlikely for several reasons.
One is the underlying secular growth of the industry combined with the pragmatic nature of semiconductor manufacturers when it comes to building out capacity. Bleeding-edge fab shells (7-nanometer nodes and below) are not cheap, costing about $2 billion and taking more than two years to build. Even greater expense lies in the equipment, which can run up to $9 billion and take up to 18 months to qualify and ramp up. When downturns reduce expectations to fill capacity, manufacturers often hit pause before adding machinery to prevent periods of overcapacity. This creates large swings of cyclicality in the semiconductor equipment market as projects are started and then paused abruptly. As the market for electronics returns to its historic growth, demand for semiconductors grows, quickly consuming any overcapacity, which is why we rarely see semiconductor downcycles lasting longer than two years.
Another factor that absorbs overcapacity is that chips can be designed on a range of technologies, and products can be adapted to take advantage of available supply, thereby rebalancing demand. This redesign process takes 12 to 18 months. So, although it didn’t help alleviate the recent shortage, it does help prevent structural or long-term overcapacity.
Similarly, large government subsidies don’t usually change this calculus. Although the US and EU are offering about $100 billion in subsidies through 2030, this is only a fraction of the $1 trillion in capex that the semiconductor industry plans to invest. Government subsidies might influence the location of fabs built, but they are unlikely to lead to structural overcapacity.
Since the market is growing, overbuilt capacity is generally consumed by market growth within a year or two, as we have seen in previous cycles.
Gauging supply, demand, and pockets of overcapacity
Although cyclicality is leveling out over time, pockets of overcapacity still occur for short periods (one or two years) and for certain technology nodes or regions.
The big question here is whether the semiconductor market remains a single global demand pool or splinters into competing blocs. A key indicator will be whether governments start to mandate where some chips are manufactured (domestically or via a trade partner). This would accelerate the splintering of semiconductor ecosystems and have a greater effect than subsidies on the global market for semiconductors.
We also see specific technologies in which the current plan to build out supply could lead to challenges—for example, the bleeding-edge foundry capacity being added by TSMC, Intel, and Samsung in the US, or the older technologies largely being built out in China and Taiwan.
Given these dynamics, we expect that the supply-demand balance will be bumpy over time by node and by region, especially in three key areas.
- Bleeding-edge foundry: If Samsung and Intel take some of TSMC’s customers or if government subsidies broaden the base of semi suppliers (such as the new Rapidus group in Japan), this would make capacity expansion decisions significantly more complex and prone to miscalculation, with overinvestment in boom times and underinvestment in busts.
- Leading-edge technologies: In the Asia-Pacific region, many foundries (TSMC, UMC, SMIC, Samsung, GloFo) produce mid-tier mature nodes (28-nanometer to 90-nanometer nodes). The market for 28-nanometer nodes, in particular, is expected to see capacity grow at 12% annually over the next few years vs. 5% to 7% for 45-nanometer and 90-nanometer technologies. If significant capacity comes online at the same time, we could see overcapacity for these older nodes for a period of time.
- Super-lagging edge fabs will remain a challenge: There’s a long tail of low-end chips, usually produced on 6- and 8-inch wafers, that serves a wide range of applications from industrial and defense to automotive and consumer devices. Similar to how low-cost labor makes producing a cost-competitive T-shirt in the US challenging, the economics of depreciated fabs producing low-end chips make it harder to get new lagging-edge fabs built in nearshore locations. About 60% of new super-lagging edge foundry capacity is expected to be built in China.
What does all this mean for industries that rely on semiconductor chips? Customers still need to pay attention to the semiconductor supply chain.
- Deepen your semiconductor capabilities. The semiconductor market remains complex, with many moving pieces. Companies that rely on semiconductors should continue to design for resilience and traceability. Improving understanding and engagement with the semiconductor market is critical.
- Leverage moments of oversupply. Close monitoring of fab build-outs and demand can help identify pockets of oversupply in which players should secure capacity and take advantage of favorable pricing opportunities.
- Develop chip-specific strategies, part 1. For example, in low-end chips, an area where multiple suppliers can be qualified, it’s important to monitor the entire market. Unexpected demand spikes in emerging areas (for example, electric vehicles) could create shortages of specialty chips. Semi vendors have historically focused on the classic IT market of computers and other tech devices. But automotive and industrial applications for semiconductors are expected to grow faster over the next few years (see Figure 2). Monitoring the balance of supply and demand and working with multiple suppliers can help guard against bottlenecks.
- Develop chip-specific strategies, part 2. For mission-critical chips such as microcontroller units, companies should partner with silicon vendors to consolidate architecture to a single chip and secure supply for long periods, monitoring that specific supplier closely. This is especially true for customer-specific chips, such as application-specific integrated circuits and other application-specific chips, particularly if manufactured in small volumes by one provider.
- Think beyond semis. Supply chain leaders are building resilience for all components in their devices. They are securing their supply of other must-have pieces such as motherboards and batteries that might be unexpectedly disrupted in another supply crisis.